Willys Model 463 Jeep Station Wagon

SPECIFICATIONS

Engine:
Type: L-Head 4 Cylinder
Bore & Stroke: 3.125 x 4.375 in
Displacement: 134 cub in
Compression Ratio 6.5:1, optional 'high altitude’ 7.0:1
Horsepower. 63 @ 4000 rpm
Torque: 105 @ 2000 rpm
Optional engines: L-Head 6 up to 1950, L-Head
Super Hurricane from 1954; from 1950, F-Head 4cyl replace L-Head 4cyl

Chassis:
Features: Separate body and chassis.
Heavy side members with one piece pressed steel channels.
Six cross members of flanged U and channel section.

Suspension & Drivetrain:
Front suspension: Semi Elliptical 10-leaf springs. Spring rate 260lb/in Capacity: 650lb direct acting hydraulic shock absorbers.
Rear suspension: Semi Elliptical 8-leaf springs. Spring rate 150lb/in Capacity: 900lb direct acting hydraulic shock absorbers.
Front axle: Spicer fully floating, Axle ratio: 5.38:1
Rear axle: Spicer semi floating
Transfer case: Two speed, Spicer Model 18. Ratios 2.42:1; 1.00:1
Transmission: Three speed manual, gear ratios: 1st - 2.798; 2nd - 1.551; 3rd - 1.0:1; Reverse 3.798:1
Brakes: Type: Hydraulic, front & rear cast iron drums, dual master cylinder, double hydraulic circuit. Clutch: single dry plate with torsional dampening, 72 sq. in

Vehicle Dimensions:
Wheelbase: 104.5 inches
Length x Width x Height: 176.25 x 71.75 x 73.56 in
Approach/ Departure angles: 38/ 19 degrees
Ground clearance: Front axle 9.5in Rear axle 8.3in
Load space: 71 in x 43.75 in x 41 in.
Turning Circle: 37.8 ft
Fuel tank: 15 gallon
Seating capacity: 4

Instrumentation:
0 - 80 speedometer, gauges for fuel level, engine coolant temperature, oil pressure, ammeter.

Optional:
Dual horns, oil bath air cleaner, vacuum booster pump, one piece rear seat, radio, front bumper guard, power take off winches, snowploughs.